Products
-
£67.0012 Position Rotary Trim Module (Boost/Fuel/Ign etc)
INCLUDES: 2 position decals and matching set of Deutsch DTM 3 connectors (HT-031014)
£67.00 -
£179.00150 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN adaptor. NOTES: "TI" Pressure sensors must not be mounted directly into the fuel r...
View full details£179.00 -
£179.00150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm)
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they m...
View full details£179.00 -
£179.00150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm)
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport Pressure sensors must not be mounted directly into the fuel rail or en...
View full details£179.00 -
£249.002000 PSI Honeywell Brake/Nitrous Pressure Sensor
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins.
£249.00 -
£179.00250 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN adaptor. NOTES: "TI" Pressure sensors must not be mounted directly into the fuel r...
View full details£179.00 -
£179.00250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm)
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport Pressure sensors must not be mounted directly into the fuel rail or en...
View full details£179.00 -
-
-
£214.005 Bar "TI" MAP Sensor
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN & 5mm hosetail adaptors. NOTES: "TI" MAP sensors must not be mounted directly ...
View full details£214.00 -
£214.005 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm)
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they m...
View full details£214.00 -
£179.0050 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm)
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they m...
View full details£179.00 -
£179.00500 PSI "TI" Pressure Sensor
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN adaptor. NOTES: "TI" Pressure sensors must not be mounted directly into the fuel r...
View full details£179.00 -
£214.007 Bar "TI" MAP Sensor
THREAD: 1/8 NPT INCLUDES: Matching plug and pins, -4 AN & 5mm hosetail adaptors. NOTES: "TI" MAP sensors must not be mounted directly to the in...
View full details£214.00 -
£40.00Air Temp Sensor
THREAD: 1/4 NPT SUITS: Nissan Z32 300ZX intake. INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.
£40.00 -
£40.00Air Temp Sensor
THREAD: 1/8 NPT INCLUDES: Matching male Deutsch DTM-2 Connector (HT-031000) NOTES: 127 deg C (260 F) Max reading.
£40.00 -
£40.00Air Temp Sensor - Large Thread
THREAD: 3/8 NPT 18TPI INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.
£40.00 -
£40.00Air Temp Sensor - Small Thread
THREAD: M14 x 1.5 INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.
£40.00 -
£91.00Analogue Output Adaptor
OUTPUTS: Converts a PWM Output to 0-5v Analogue Signal. SUITS: e.g for use with Evo 10 AWD controller. INCLUDES: HT-031016 - Matching Set of Deutsc...
View full details£91.00 -
£134.00Bosch Fluid Pressure and Temperature Sensor
THREAD: M10 x 1.0 INCLUDES: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor. NOTES: Used to measure fluid pressure and temperature Pr...
View full details£134.00 -
£38.40CAN Adaptor Loom DTM-4 to 6-pin Circular Connector
SUITS: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force GDI) INCLUDES: 1 x CAN Adaptor Loom (DTM-4 to 6-pin ...
View full details£38.40 -
£19.00CAN Adaptor Loom DTM-4 to Flying Leads
SUITS: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector INCLUDES: 1 x HT-130046 CAN Adaptor Loom (DTM...
View full details£19.00 -
£31.00CAN Adaptor Loom DTM-4 to JST 5-pin
SUITS: Haltech IC-7 Dash, WBC 1, WBC 2 and Link Plug-in ECUs INCLUDES: 1 x CAN Adaptor Loom (DTM-4 to JST 5-pin) - Suits Link PlugIn ECUs NOTES: Us...
View full details£31.00 -
£31.00CAN Adaptor Loom DTM-4 to Minifit Jr
SUITS: Haltech iC-7 and Microtech ECUs INCLUDES: 1 x HT-130049 Can Adaptor Loom NOTES: Use with Microtech CAN Hub for direct plug and play
£31.00
