Haltech
As a UK dealer for the Haltech range of ECU's and control systems we are able to supply and support any of their products.
Call us for pricing and details on anything that isn't listed.
Website - https://www.haltech.com/
ECU COMPARISON
-
£109.00 GBPGPS Speed Input Module
LENGTH: 300mm OUTPUTS: 0V to 12V Pulsed Output SUITS: Applications that require a digital speed signal INCLUDES: Includes: GPS Speed Input Module &...
View full details£109.00 GBP -
£91.00 GBPKnock Sensor - Genuine Bosch
SUITS: 8mm (5/16") mounting bolt. INCLUDES: Matching plug and 2 pins.
£91.00 GBP -
£245.00 GBPTriple Switch Panel Kit
INCLUDES: Triple panel, yellow and red adjustment knobs and 3 x 12 position rotary trim modules.
£245.00 GBP -
£170.00 GBPDual Switch Panel Kit
INCLUDES: Dual panel, yellow adjustment knob and 2 x 12 position rotary trim modules.
£170.00 GBP -
£67.00 GBP12 Position Rotary Trim Module (Boost/Fuel/Ign etc)
INCLUDES: 2 position decals and matching set of Deutsch DTM 3 connectors (HT-031014)
£67.00 GBP -
£179.00 GBPThrottle Position Sensor - Motorsport Contactless
SIZE: 8mm D-Shaft SUITS: CW & CCW Rotation INCLUDES: Matching Set of Deutsch DTM-3 Connectors (HT-031014)
£179.00 GBP -
£73.00 GBPOil Temperature sensor High Range
THREAD: 1/8 NPT 27TPI INCLUDES: Matching Bosch EV1 plug & pins. NOTES: 150 deg C (302 F) Max reading.
£73.00 GBP -
£40.00 GBPCoolant Temp Sensor
THREAD: 1/8 NPT 27TPI INCLUDES: Matching male Deutsch DTM-2 Connector (HT-031000) NOTES: 127 deg C (260 F) Max reading.
£40.00 GBP -
£40.00 GBPCoolant Temp Sensor - Large Thread
THREAD: 3/8 NPT 18TPI INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.
£40.00 GBP -
£40.00 GBPCoolant Temp Sensor - Small Thread
THREAD: M12 x 1.5 INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.
£40.00 GBP -
£40.00 GBPAir Temp Sensor
THREAD: 1/4 NPT SUITS: Nissan Z32 300ZX intake. INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.
£40.00 GBP -
£40.00 GBPAir Temp Sensor - Large Thread
THREAD: 3/8 NPT 18TPI INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.
£40.00 GBP -
£40.00 GBPAir Temp Sensor - Small Thread
THREAD: M14 x 1.5 INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.
£40.00 GBP -
£179.00 GBPFlex Fuel Composition Sensor
SUITS: 3/8 "GM Spring Lock" fittings. INCLUDES: Matching plug and 3 pins.
£179.00 GBP -
£179.00 GBP250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm)
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport Pressure sensors must not be mounted directly into the fuel rail or en...
View full details£179.00 GBP -
£179.00 GBP150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm)
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport Pressure sensors must not be mounted directly into the fuel rail or en...
View full details£179.00 GBP -
£249.00 GBP2000 PSI Honeywell Brake/Nitrous Pressure Sensor
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins.
£249.00 GBP -
£179.00 GBP500 PSI "TI" Pressure Sensor
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN adaptor. NOTES: "TI" Pressure sensors must not be mounted directly into the fuel r...
View full details£179.00 GBP -
£179.00 GBP250 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN adaptor. NOTES: "TI" Pressure sensors must not be mounted directly into the fuel r...
View full details£179.00 GBP -
£179.00 GBP150 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN adaptor. NOTES: "TI" Pressure sensors must not be mounted directly into the fuel r...
View full details£179.00 GBP -
£46.00 GBPFlex Fuel Fittings 3/8 "GM Spring Lock" -6AN Male
SUITS: GM Flex Fuel Sensors. INCLUDES: Two fittings.
£46.00 GBP -
£179.00 GBP50 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm)
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they m...
View full details£179.00 GBP -
£214.00 GBP5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm)
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they m...
View full details£214.00 GBP -
£179.00 GBP150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm)
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they m...
View full details£179.00 GBP -
-
-
£214.00 GBP5 Bar "TI" MAP Sensor
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN & 5mm hosetail adaptors. NOTES: "TI" MAP sensors must not be mounted directly ...
View full details£214.00 GBP -
£214.00 GBP7 Bar "TI" MAP Sensor
THREAD: 1/8 NPT INCLUDES: Matching plug and pins, -4 AN & 5mm hosetail adaptors. NOTES: "TI" MAP sensors must not be mounted directly to the in...
View full details£214.00 GBP -
£13.00 GBPPlug and Pins Only - Delphi 3 Pin Pressure Sensor Connector
SUITS: HT-010110 - 5 Bar TI MAP Sensor HT-010138 - 5 Bar Motorsport MAP Sensor HT-010130 - 7 Bar TI MAP Sensor HT-010904 - 150 PSI TI Pressure Sens...
View full details£13.00 GBP -
£31.00 GBPCAN Adaptor Loom DTM-4 to Minifit Jr
SUITS: Haltech iC-7 and Microtech ECUs INCLUDES: 1 x HT-130049 Can Adaptor Loom NOTES: Use with Microtech CAN Hub for direct plug and play
£31.00 GBP -
£31.00 GBPCAN Adaptor Loom DTM-4 to JST 5-pin
SUITS: Haltech IC-7 Dash, WBC 1, WBC 2 and Link Plug-in ECUs INCLUDES: 1 x CAN Adaptor Loom (DTM-4 to JST 5-pin) - Suits Link PlugIn ECUs NOTES: Us...
View full details£31.00 GBP -
£38.40 GBPCAN Adaptor Loom DTM-4 to 6-pin Circular Connector
SUITS: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force GDI) INCLUDES: 1 x CAN Adaptor Loom (DTM-4 to 6-pin ...
View full details£38.40 GBP -
£19.00 GBPCAN Adaptor Loom DTM-4 to Flying Leads
SUITS: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector INCLUDES: 1 x HT-130046 CAN Adaptor Loom (DTM...
View full details£19.00 GBP -
£36.00 GBPiC-7 OBDII to CAN Cable
LENGTH: 3000mm / 120in SUITS: Haltech iC-7 Dash INCLUDES: Cables and Fuse
£36.00 GBP -
£424.00 GBPHaltech Elite 1000/1500 Honda Civic EP3 Plug 'n' Play Adaptor Harness
SUITS: Plug 'n' Play replacement of the factory ECU for Honda Civic EP3 and Integra DC5/Acura RSX 01-04 Manual transmission only. (Does not support...
View full details£424.00 GBP -
£424.00 GBPElite 750 Mazda Miata (MX-5) NB Plug'n'Play Adaptor Harness
SUITS: Mazda Miata (MX-5) NB 1.8L Non VCT or VCT (00-04) 1.8L Factory Turbo SE (Aus), Mazdaspeed (04-05 USA) with 3-plug 3-row factory ECU. Manual ...
View full details£424.00 GBP -
£424.00 GBPHaltech Elite 1000/1500 Plug'n'Play Adaptor Harness for Honda S2000
SUITS: Honda S2000 AP1 (00-04), AP2 (05) non-DBW INCLUDES: Plug'n'Play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxi...
View full details£424.00 GBP -
£424.00 GBPHaltech Elite 2000/2500 Nissan R34 GT-T, Stagea WC34 Plug'n'Play Adaptor Harness
SUITS: Nissan Skyline R34 GT-T, Stagea WC34 Series. INCLUDES: Injection moulded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor wi...
View full details£424.00 GBP -
£424.00 GBPHaltech Elite 2000/2500 Nissan Skyline R32/33/R34 GT-R Plug'n'Play Adaptor Harness
SUITS: Nissan Skyline R32 GTS-T, R32 GT-R, R33 GTS-T, R33 GT-R, R34 GT-R INCLUDES: Plug'n'Play adaptor harness. M14 x 1.5 air temp sensor with matc...
View full details£424.00 GBP -
£424.00 GBPHaltech Elite 1500 VW/Audi 1.8T AWP ONLY (2001-2006) Plug 'n' Play Adaptor Harness
SUITS: Plug 'n' Play replacement of the factory ECU for VW/Audi 1.8T AWP ONLY (2001-2006) Volkswagen Golf Mk4 GTI, Bora/Jetta, Beetle, Polo GTI, Au...
View full details£424.00 GBP -
£634.00 GBPHaltech Elite 1500 Polaris Slingshot (2015-2016) Plug'n'Play Adaptor Harness
SUITS: Plug 'n' Play replacement of the factory ECU for Polaris RZR XP 1000 (2015-2016) INCLUDES: Moulded polyurethane plug 'n' play adaptor harnes...
View full details£634.00 GBP -
£704.00 GBPHaltech Elite 1500 Polaris RZR XP 1000 (2015-2016) Plug 'n' Play Adaptor Harness
SUITS: Plug 'n' Play replacement of the factory ECU for Polaris RZR XP 1000 (2015-2016) INCLUDES: Molded polyurethane plug 'n' play adaptor harness...
View full details£704.00 GBP -
£424.00 GBPHaltech Elite 1000/1500 Mazda Miata (MX-5) NB Plug'n'Play Adaptor Harness
SUITS: Mazda Miata (MX-5) NB ADM Special Edition (Factory Turbo), USDM Special Edition (Factory Turbo), VCT, Non-VCT (00-04 Aust, 01-05 USA). 3-plu...
View full details£424.00 GBP -
£424.00 GBPHaltech Elite 1000/1500 Honda Integra DC5 Plug 'n' Play Adaptor Harness
SUITS: Plug 'n' Play replacement of the factory ECU for Honda Integra DC5/Acura RSX 05-06 Manual transmission only. (Does not support factory multi...
View full details£424.00 GBP -
£424.00 GBPHaltech Elite 1000/1500 Honda OBD-I B-Series Plug 'n' Play Adaptor Harness
SUITS: Plug 'n' Play replacement of the factory ECU for Honda OBD-I B-Series 92-95 Civic, Integra and Prelude. 90-95 Accord. Manual transmission on...
View full details£424.00 GBP -
£73.00 GBPHaltech iC-7 Tube Mount For tube OD 1.25in (31.75mm)
SIZE: 60mm x 44mm SUITS: iC-7 Mounting Brackets (HT-060070 and HT-060071) INCLUDES: 1 x Annodized Dash Tube Mount 2 x Zinc M8 x 10 Bracket Mo...
View full details£73.00 GBP -
-
