Skip to content

Sensors & Accessories

  • CAN Adaptor Loom DTM-4 to Minifit Jr
    £31.00 GBP

    CAN Adaptor Loom DTM-4 to Minifit Jr

    SUITS: Haltech iC-7 and Microtech ECUs INCLUDES: 1 x HT-130049 Can Adaptor Loom NOTES: Use with Microtech CAN Hub for direct plug and play  

    £31.00 GBP
  • CAN Adaptor Loom DTM-4 to JST 5-pin
    £31.00 GBP

    CAN Adaptor Loom DTM-4 to JST 5-pin

    SUITS: Haltech IC-7 Dash, WBC 1, WBC 2 and Link Plug-in ECUs INCLUDES: 1 x CAN Adaptor Loom (DTM-4 to JST 5-pin) - Suits Link PlugIn ECUs NOTES: Us...

    View full details
    £31.00 GBP
  • CAN Adaptor Loom DTM-4 to 6-pin Circular Connector
    £38.40 GBP

    CAN Adaptor Loom DTM-4 to 6-pin Circular Connector

    SUITS: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force GDI) INCLUDES: 1 x CAN Adaptor Loom (DTM-4 to 6-pin ...

    View full details
    £38.40 GBP
  • CAN Adaptor Loom DTM-4 to Flying Leads
    £19.00 GBP

    CAN Adaptor Loom DTM-4 to Flying Leads

    SUITS: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector INCLUDES: 1 x HT-130046 CAN Adaptor Loom (DTM...

    View full details
    £19.00 GBP
  • iC-7 OBDII to CAN Cable
    £36.00 GBP

    iC-7 OBDII to CAN Cable

    LENGTH: 3000mm / 120in SUITS: Haltech iC-7 Dash INCLUDES: Cables and Fuse  

    £36.00 GBP
  • Elite 750 Mazda Miata (MX-5) NB Plug'n'Play Adaptor Harness
    £424.00 GBP

    Elite 750 Mazda Miata (MX-5) NB Plug'n'Play Adaptor Harness

    SUITS: Mazda Miata (MX-5) NB 1.8L Non VCT or VCT (00-04) 1.8L Factory Turbo SE (Aus), Mazdaspeed (04-05 USA) with 3-plug 3-row factory ECU. Manual ...

    View full details
    £424.00 GBP
  • Haltech iC-7 OBDII to CAN Cable
    £36.00 GBP

    Haltech iC-7 OBDII to CAN Cable

    LENGTH: 3000mm / 120in SUITS: Haltech iC-7 Dash INCLUDES: Cables and Fuse

    £36.00 GBP
  • Haltech Wideband Sensor - Bosch LSU 4.9
    £109.00 GBP

    Haltech Wideband Sensor - Bosch LSU 4.9

    SUITS: Elite Pro Plugin ECU and WB1/WB2 INCLUDES: Bosch LSU 4.9 sensor with Factory calibration resistor connector (not a Deutsch DT-6 connector)  

    £109.00 GBP
  • Haltech WB2 - Dual Channel CAN O2 Wideband Controller Kit
    £454.00 GBP

    Haltech WB2 - Dual Channel CAN O2 Wideband Controller Kit

    LENGTH: 1.2M (4ft) INCLUDES: Dual Channel, CAN Wideband Controller, 2 x 4.9LSU Sensor, CAN Cable (4'/1200mm), Power Supply Cable, 2 x Weld-on Bung,...

    View full details
    £454.00 GBP
  • LINK CAN PLUG (CANF)
    £21.60 GBP

    LINK CAN PLUG (CANF)

    PLUG (CANF) Soldering is required for assembly

    £21.60 GBP
  • LINK 4 PORT BOOST CONTROL SOLENOID - TDi North
    £168.00 GBP

    LINK 4 PORT BOOST CONTROL SOLENOID

    BOOST CONTROL SOLENOID Four Port4 x 1/8 NPT ports

    £168.00 GBP
  • LINK 3 PORT BOOST CONTROL SOLENOID - TDi North
    £132.00 GBP

    LINK 3 PORT BOOST CONTROL SOLENOID

    BOOST CONTROL SOLENOID Three Port3 x 1/8 NPT ports

    £132.00 GBP
  • LINK CABLE (CANPC) - TDi North
    £34.80 GBP

    LINK CABLE (CANPC)

    CABLE (CANPCB) Required to add CAN / Serial communications

    £34.80 GBP
  • LINK COOLANT TEMP SENSOR - #NTC1-8 - TDi North
    £56.60 GBP

    LINK COOLANT TEMP SENSOR - #NTC1-8

    COOLANT TEMPERATURE SENSOR (NTC1-8) Complete with plug and terminals. Aluminium and steel, weld in, mounting bosses available

    £56.60 GBP
  • LINK AIR TEMP SENSOR - #IAT1-8 - TDi North
    £75.60 GBP

    LINK AIR TEMP SENSOR - #IAT1-8

    AIR TEMP SENSOR (IAT1-8) 1/8" NPT complete with plug and terminals. Aluminium and steel, weld in, mounting bosses available

    £75.60 GBP
  • LINK ETHANOL CONTENT SENSOR - #ECS - TDi North
    £246.00 GBP

    LINK ETHANOL CONTENT SENSOR - #ECS

    ETHANOL CONTENT SENSOR - #ECS Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle. Comes with AN-6 fitting. ...

    View full details
    £246.00 GBP
  • LINK 3 BAR MAP SENSOR (MAP3) - TDi North
    £132.00 GBP

    LINK 3 BAR MAP SENSOR (MAP3)

    3 BAR MAP SENSOR (MAP3) MAP Sensor capable of reading of reading up to 3 Bar (2 Bar of boost).Includes 3 Bar MAP Sensor and plugs and pins.

    £132.00 GBP
  • LINK 4 BAR MAP SENSOR (MAP4) - TDi North
    £139.20 GBP

    LINK 4 BAR MAP SENSOR (MAP4)

    LINK 4 BAR MAP SENSOR (MAP4) MAP Sensor capable of reading up to 4 Bar (3 Bar of boost).Includes 4 Bar MAP Sensor and plugs and pins.

    £139.20 GBP
  • LINK CAN LAMBDA - TDi North
    £372.00 GBP

    LINK CAN LAMBDA

    CAN LAMBDA Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with lead...

    View full details
    £372.00 GBP
  • LINK TUNING CABLE - TDi North
    £56.40 GBP

    LINK TUNING CABLE

    TUNING CABLE (CUSB) USB Tuning Cable - ECU to USB

    £56.40 GBP
  • LINK KNOCK SENSOR - #KNS - TDi North
    £100.80 GBP

    LINK KNOCK SENSOR - #KNS

    KNOCK SENSOR (KNS) Donut style, 8mm hole, with matching connector

    £100.80 GBP